Roguewood Furniture

The factory in Grants Pass, Oregon.

Cutting raw aromatic cedar wood from the mill.

Brian and Gary grading the raw cedar wood.

Mitch marks defects at in-feed of computer controlled chop saw.

Gary sorts wood at out-feed line at end of computer controlled chop saw.

Ricky and Mitch layup panel stock at out-feed of chop saw.

Ricky feeds boards into moulder where long lumber stock is shaped and detailed.

Rich C. &amp; Brady use the straight line rip saw to process the edge of the board.

Gary feeds wood into the straight line rip saw.

Ricky and Brady work the straight line rip saw to make table tops.

Eric cuts wood to precise length with CTD mitre saw.

Brady feeds panel stock into the large planer sander.

Milo making some final adjustments to the router.

Wood flies from the computer numerically controlled (CNC) router head during a cut.

Brian runs our machine shop for making and sharpening tools (i.e. for router head, etc.)

Gabe feeds wood stock into scanner prior to gluing up a panel.

Gabe glues wood stock in Taylor Clamp Carrier.

Brady applies glue to tenons for door assembly.

Dennis measuring for the CNC router.

Milo prepping a mortise &amp; tenon table leg for a trestle table.

Milo continues to sand on the tenon leg.

Milo tests the fit for the trestle table leg.

Joe chisels a wood tenon for a chair assembly.

Tom &amp; Brian fine sand cases prior to staining and finishing.

Brian hand block-sands a dresser top prior to staining.

Tom sanding a drawer.

Brian hand sands the sealer coat during one of several finishing steps.

Tom sprays a top-coat finish on a dresser assembly.

A mule chest and drawers air dry after getting one of several coats of stain and sealers.

Brian wiping down table tops after staining.

Gabe attaching the drawer pull hardware during finish assembly.

Tammy does some finish assembly.

Rich C. attaches glass to a door in finish assembly.

The Roguewood factory showroom, located at the end of the Roguewood/Bentwood manufacturing plant.

Look for our hand-painted Bentwood mural when you come see us!